🔥 Get 30% off all Small Format products using code EASYSML30 at checkout! 🤑
24 Hour Production
We can produce your order in as little as 24 hours after artwork proof sign off:
< 21 units - 24 hours (1 working day) after artwork proof sign off
< 51 units - 48 hours (2 working days) after artwork proof sign off and receipt of deposit if over $3300
< 101 units - 3 working days after artwork proof sign off and receipt of deposit
< 201 units - 4 working days after artwork proof sign off and receipt of deposit
Delivery $14 USA Wide
1 x 6 Foot, Fitted with Four Sides, Table Throw with Full Color Digitally Printed Graphics
1 x 6 Foot, Loose with Four Sides, Table Throw with Full Color Digitally Printed Graphics
1 x 4 Foot, Loose with Four Sides, Table Throw with Full Color Digitally Printed Graphics
1 x 8 Foot, Loose with Four Sides, Table Throw with Full Color Digitally Printed Graphics
Spice up your display in seconds with our Table Throws. Designed to fit standard 4 ft, 6 ft and 8 ft trestle tables, they’re lightweight, quick to set up and an easy way to turn a plain table into a polished branded display.
Want to stand out even more? Add an optional Table Top Banner to take your branding above the crowd, helping you stay visible and noticed from a distance.
Table Throws have been sized to fit standard trestle table sizes:
Check out our wide range of Event Signage options, designed to perfectly complement your branding!
** The fixed shipping price is based on delivering your entire order to one location.
We can produce your order in as little as 24 hours after artwork proof sign off:
< 21 units - 24 hours (1 working day) after artwork proof sign off
< 51 units - 48 hours (2 working days) after artwork proof sign off and receipt of deposit if over $3300
< 101 units - 3 working days after artwork proof sign off and receipt of deposit
< 201 units - 4 working days after artwork proof sign off and receipt of deposit
Our Round, Loose and Fitted Table Throws are printed with a high quality 7.35 oz. polyester fabric material
Yes the table throws are printed in full color so you can choose any color and design you like - and we can print your logo or image on all sides of the table throws.
The 3 sided Fitted and Loose Table Throws are manufactured with a small “lip” across the top of the open side. This section allows the Table Throws to have two corners to grip onto the back of the table so the Table Throws cannot slide off.
We recommend that you use a steamer to remove any creases from the polyester fabric. It’s also possible to use a warm iron, but it is important that you use an ironing cloth so that the iron does not make contact with the fabric.
The table throws have been sized to fit the standard trestle tables as follows:
4 foot: 48” L x 24” W x 29”
6 foot: 72” L x 30” W x 30”
8 foot: 96” L x 30” W x 30”
We only supply the 3 sizes to suit 4 ft / 6 ft / 8 ft standard trestle tables
The following are the overall sizes of our Table Throws when they are laid out flat (and as shown on our artwork templates) prior to any sewing. Please note that the back section of the 3 sided Table Throws will be sewn into a pocket (which holds it onto the table). The Fitted Table Throws will also be sewn on each side to allow them to fit the tables. All of these measurements are prior to sewing the back pockets and the fitted sides.
Loose Table Throws:
Fitted Table Throws:
We do not supply trestle tables. The standard size trestle tables are supplied by most major hardware stores.
It is not recommended to use this outdoors due to the wind catching the banner and knocking over the table
No. Our banners are designed to clamp directly onto a table using two clamps.
Simply slide the fabric over the frame and clamp the frame to the longest side of your table.
The clamps work like standard table clamps. Simply loosen the screw to open, position the clamp on the table, then tighten the screw underneath to secure it in place.
For assembly instructions, you can refer to our Assembly Guide.
A small connector piece slots into both the clamp and pole hardware. Once the screw on the clamp is tightened, it securely holds the connector securely in place.
Yes, our price includes the set up cost for 1 design only. If you have multiple designs for the same size you will still get the lower bulk price, however there is a small multiple artwork charge applied for each additional design to cover our extra set up costs. Simply enter the total number of signs required and then the total number of designs into the pricing calculator above - and it will work out an accurate price for you.
Get a quote then select a template to customize
Please refresh the page or contact us if the issue persists.
Please refresh the page or contact us if the issue persists.
Product: Table Throws Edit configuration
At Easy Signs, we manufacture our high quality SignWeave™ fabric products in our Pennsylvania manufacturing facility in only 24 hours from your artwork approval!
We know that you want your signs fast! Our in-house printing means you no longer have to wait weeks for your supplier to outsource their fabric products from China.
Our high tech European-made equipment, combined with Easy Signs’ industry leading manufacturing process, allows us to produce your fabric orders faster than any other supplier!
AddressEasy Signs Inc |
Contact Us
Phone: 1-800-401-9242 |
Let's get social |
$14
delivery on most products**
Design online with FREE templates
24hr production*
